Climate change is reshaping the risk landscape for natural gas pipelines, with landslides emerging as a major driver of technological accidents triggered by natural hazards (Natech events). Conventional Natech risk models rarely incorporate climate-sensitive parameters such as groundwater levels and soil moisture, limiting their capacity to capture evolving threats. This study develops a probabilistic model that explicitly links climate-driven landslide susceptibility to pipeline vulnerability, providing a quantitative basis for assessing pipeline failure probability under different emission projection scenarios. Using Monte Carlo simulations across five regions in China, the results show that under high-emission pathways (SSP5-8.5), pipeline failure probability in summer increases dramatically. For example, from 0.320 to 0.943 in Xinjiang, 0.112 to 0.220 in Sichuan, and 0.087 to 0.188 in Hainan. In cold regions, winter failure probability more than doubles, rising from 0.206 to 0.501 in Heilongjiang and from 0.235 to 0.488 in Beijing. These shifts reveal an overall increase in risk, intensification of seasonal contrasts, and, in some areas, a reconfiguration of high-risk periods. Sensitivity analysis highlights groundwater levels and soil moisture as the dominant drivers, with regional differences shaped by precipitation regimes, permafrost thaw, and typhoon impacts. Building on these insights, this study proposes an AI-based condition-monitoring framework that integrates real-time climate and geotechnical data to support adaptive early warning and safety management.

Slope failures resulting from thaw slumps in permafrost regions, have developed widely under the influence of climate change and engineering activities. The shear strength at the interface between the active layer and permafrost (IBALP) at maximum thawing depth is a critical factor to evaluate stability of permafrost slopes. Traditional direct shear, triaxial shear, and large-scale in-situ shear experiments are unsuitable for measuring the shear strength parameter of the IBALP. Based on the characteristics of thaw slumps in permafrost regions, this study proposes a novel test method of self-weight direct shear instrument (SWDSI), and its principle, structure, measurement system and test steps are described in detail. The shear strength of the IBALP under maximum thaw depth conditions is measured using this method. The results show that under the condition that the permafrost layer is thick underground ice and the active layer consists of silty clay with 20% water content, the test results are in good agreement with the results of field large-scale direct shear tests and are in accordance with previous understandings and natural laws. The above analysis indicates that the method of the SWDSI has a reliable theoretical basis and reasonable experimental procedures, and meets the needs of stability assessment of thaw slumps in permafrost regions. The experimental data obtained provide important parameter support for the evaluation of related geological hazards.

Against the backdrop of global warming, the increasing spatiotemporal variability in precipitation patterns has intensified the frequency and risk of dry-wet abrupt alternation (DWAA) events in semi-arid regions. This study investigates the Hailar River Basin in northern China (1980-2019) and develops the Soil Moisture Concentration Index (SMCI) using daily soil moisture (SM) data simulated by the VIC hydrological model. A high-resolution temporal framework is introduced to detect DWAA events and evaluate the impact of precipitation pattern variations on dry-wet transitions in the basin. The results indicate: (1) Annual precipitation in the basin has significantly increased (0.47 mm y(-1) in the south, P < 0.05), while precipitation intensity follows a gradient pattern, increasing in the upstream (3.65 mm d1 y1) and decreasing in the downstream (-2.34 mm y(-1)). Additionally, the number of dry days and short-duration, high-intensity precipitation events has risen; (2) Soil moisture (SM) data simulated by the VIC model effectively capture DWAA events, showing significantly higher | SMCI| values downstream than upstream (P < 0.05) and indicating more intense dry-wet transitions in the downstream region. Furthermore, 78 % of the area exhibits an increasing trend in |SMCI|(1980-2019), with dry-to-wet transition events occurring more frequently than wet-to-dry events. For instance, in 2013, the maximum coverage area reached 48 % in a single day; (3) The random forest model highlights the spatial heterogeneity of DWAA driving factors: upstream water yield is the dominant factor, whereas downstream variations are closely associated with precipitation intensity (R-2 = 0.76) and the frequency of heavy rainfall days. Permafrost degradation and land use changes further heighten hydrological sensitivity in the downstream region. This study offers a transferable methodological framework for understanding extreme hydrological events and reveals that the driving mechanisms of DWAA are spatially heterogeneous, shifting from being dominated by terrestrial factors in the headwaters to meteorological factors downstream-a finding with significant implications for water resource management in other large, heterogeneous semi-arid basins.

Conventional materials necessitate a layer-by-layer rolling or tamping process for subgrade backfill projects, which hampers their utility in confined spaces and environments where compaction is challenging. To address this issue, a self-compacting poured solidified mucky soil was prepared. To assess the suitability of this innovative material for subgrade, a suite of performance including flowability, bleeding rate, setting time, unconfined compressive strength (UCS), and deformation modulus were employed as evaluation criteria. The workability and mechanical properties of poured solidified mucky soil were compared. The durability and solidification mechanism were investigated. The results demonstrate that the 28-day UCS of poured solidified mucky soil with 20% curing agent content reaches 2.54 MPa. The increase of organic matter content is not conducive to the solidification process. When the curing temperature is 20 degrees C, the 28-day UCS of the poured solidified mucky soil with curing agent content not less than 12% is greater than 0.8 MPa. The three-dimensional network structure formed with calcium silicate hydrate, calcium aluminate hydrate, and ettringite is the main source of strength formation. The recommended mud moisture content is not exceed 85%, the curing agent content is 16%, and the curing temperature should not be lower than 20 degrees C.

The reasonable value of good gradation characteristic parameters is key in designing and optimising soil-rock mixed high fill embankment materials. Firstly, the DJSZ-150 dynamic-static large-scale triaxial testing instrument was used for triaxial compression shear tests on compacted skeleton structure soil-rock mixture standard specimens. The changes in strength and deformation indicators under different gradation parameters and confining pressure were analysed. Then, based on the Janbu empirical formula, relationships between parameters K, n, and (sigma 1-sigma 3)ult and the coefficient of uniformity Cu and coefficient of curvature Cc were explored. Empirical fitting formulas for Duncan-Chang model constants a and b were proposed, establishing an improved Duncan-Chang model for soil-rock mixtures considering gradation characteristics and stress states. Finally, based on significant differences in particle spatial distribution caused by gradation changes, three generalised models of matrix-block stone motion from different particle aggregation forms were proposed. Results indicate the standard specimen's strength and deformation indicators exhibit significant gradation effects and stress-state correlations. The improved Duncan-Chang model effectively simulates the stress-strain relationship curve under different gradations and confining pressure, with its characteristics explainable based on the matrix block stone motion generalised model.

Canopy reflectance (CR) models describe the transfer and interaction of radiation from the soil background to the canopy layer and play a vital role in the retrieval of biophysical variables. However, few efforts have focused on estimating soil background scattering operators, resulting in uncertainties in CR modelling, especially over sloping terrain. This study developed a canopy reflectance model for simulating CR over sloping terrain, which combines the general spectral vector (GSV) model, the PROSPECT model, and 4SAIL model coupled with topography (GSV-PROSAILT). The canopy reflectance simulated by GSV-PROSAILT was validated against two datasets: discrete anisotropic radiative transfer (DART) simulations and remote sensing observations. A comparison with DART simulations under various conditions revealed that the GSV-PROSAILT model captures terrain-induced CR distortion with high accuracy (red band: coefficient of determination $\lpar {\rm R 2} \rpar = 0.731$(R2)=0.731, root-mean-square error (RMSE) = 0.007; near infrared (NIR) band: $\rm R2 = 0.8319$R2=0.8319, RMSE = 0.0098). The results of remote sensing observation verification revealed that the GSV-PROSAILT model can be successfully used in CR modelling. These validations confirmed the performance of GSV-PROSAILT in soil and canopy reflectance modelling over sloping terrain, indicating that it can provide a potential tool for biophysical variable retrieval over mountainous areas.

On December 18, 2023, a magnitude MS6.2 earthquake struck Jishishan County, Gansu Province, triggering over 40 seismic subsidence sites within a seismic intensity VI zone, 32 km from the epicenter.The earthquake caused tens of millions in economic losses to mountain photovoltaic power stations. Extensive geological surveys and comparisons with similar landslides (such as soil loosening, widespread cracks, and stepped displacements) triggered by the 1920 Haiyuan MS8.5 earthquake and the 1995 Yongdeng MS5.8 earthquake, this study preliminarily identifies one subsidence sites as a seismic-collapsed loess landslide. To investigate its disaster-causing mechanism: the dynamic triaxial test was conducted to assess the seismic subsidence potential of the loess at the site, and the maximum subsidence amount under different seismic loads were calculated by combining actual data from nearby bedrock stations with site amplification data from the active source; simulation of the destabilization evolution of seismic-collapsed loess landslides by large-scale shaking table tests; and a three-dimensional slope model was developed using finite element method to study the complex seismic conditions responsible for site damage. The research findings provide a theoretical foundation for further investigations into the disaster mechanisms of seismic-collapsed loess landslides.

The morphology of sheep wool applied as organic fertilizer biodegraded in the soil was examined. The investigations were conducted in natural conditions for unwashed waste wool, which was rejected during sorting and then chopped into short segments and wool pellets. Different types of wool were mixed with soil and buried in experimental plots. The wool samples were periodically taken and analyzed for one year using Scanning Electron Microscopy (SEM) and Energy-dispersive X-ray Spectroscopy (EDS). During examinations, the changes in the fibers' morphology were observed. It was stated that cut wool and pellet are mechanically damaged, which significantly accelerates wool biodegradation and quickly destroys the whole fiber structure. On the contrary, for undamaged fibers biodegradation occurs slowly, layer by layer, in a predictable sequence. This finding has practical implications for the use of wool as an organic fertilizer, suggesting that the method of preparation can influence its biodegradation rate. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(SEM)(sic)(sic)(sic)(sic)(sic)X(sic)(sic)(sic)(sic)(EDS)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic).

Glacier shrinkage, a notable consequence of climate change, is expected to intensify, particularly in high-elevation areas. While plant diversity and soil microbial communities have been studied, research on soil organic matter (SOM) and soil protein function dynamics in glacier forefields is limited. This limited understanding, especially regarding the link between microbial protein functions and biogeochemical functions, hampers our knowledge of soil-ecosystem processes along chronosequences. This study aims to elucidate the mechanistic relationships among soil bacterial protein functions, SOM decomposition, and environmental factors such as plant density and soil pH to advance understanding of the processes driving ecosystem succession in glacier forefields over time. Proteomic analysis showed that as ecosystems matured, the dominant protein functions transition from primarily managing cellular and physiological processes (biological controllers) to orchestrating broader ecological processes (ecosystem regulators) and increasingly include proteins involved in the degradation and utilization of OM. This shift was driven by plant density and pH, leading to increased ecosystem complexity and stability. Our confirmatory path analysis findings indicate that plant density is the main driver of soil process evolution, with plant colonization directly affecting pH, which in turn influenced nutrient metabolizing protein abundance, and SOM decomposition rate. Nutrient availability was primarily influenced by plant density, nutrient metabolizing proteins, and SOM decomposition, with SOM decomposition increasing with site age. These results underscore the critical role of plant colonization and pH in guiding soil ecosystem trajectories, revealing complex mechanisms and emphasizing the need for ongoing research to understand long-term ecosystem resilience and carbon sequestration.

To investigate the effect of interface temperature on the soil-reinforcement interaction mechanism, a series of pullout tests were conducted considering different types of reinforcement (geogrid and non-woven geotextile), backfill (dry sand, wet sand, and clay), and six interface temperatures. The test results indicate that at interface temperatures of 0 degrees C and above, reinforcement failure didn't occur during the pullout tests, whereas it predominantly occurred at subzero temperatures. Besides, the pullout resistance for the same soil-reinforcement interface gradually decreased as the interface temperature rose. At a given positive interface temperature, the pullout resistance between wet sand and reinforcement was significantly higher than that of the clayreinforcement interface but lower than that of the dry sand-reinforcement interface. Compared with geotextile reinforcements, geogrids were more difficult to pull out under the same interface temperature and backfill conditions. In addition, the lag effect in the transfer of tensile forces within the reinforcements was significantly influenced by the type of soil-reinforcement interface and the interface temperature. Finally, the progressive deformation mechanism along the reinforcement length at different interface temperatures was analyzed based on the strain distribution in the reinforcement.