润滑科技信息平台

Microstructure and wear properties of B-Al layer on Ti6Al4V titanium alloy by boron-aluminizing with rare-earth oxide

出版日期: 2025-07-31

DOI: https://doi.org/10.1016/j.triboint.2025.111050

In this work, Ti6Al4V titanium alloy was surface modified by boron-aluminizing with rare-earth oxides (RE-B-Al), in which the first step is boriding with rare-earth oxides (RE-B) and the second step is aluminizing. The wear properties of the samples were tested by friction wear experiments. The results indicated that the B-Al layer by RE-B-Al is mainly composed of TiB 2 layer, TiB whisker intermediate layer, and Al3Ti inner layer. After RE-B-Al process, the surface elastic moduli of RE-B-Al samples are higher than Ti6Al4V alloy. The wear type of Ti6Al4V alloy is adhesive wear, while the that of the RE-B-Al samples is abrasive and adhesive wear.

Influence of WC particle size on microstructural evolution and wear behavior of laser cladding WC/Ti6Al4V composite coatings

Pub Date: 2025-07-31 DOI: https://doi.org/10.1016/j.triboint.2025.111050

Microstructure and mechanical properties of Fe-7.5Cu porous alloys reinforced with graphene nanosheets prepared by pressureless vacuum microwave sintering

Pub Date: 2025-07-31 DOI: https://doi.org/10.1016/j.triboint.2025.111050

[Ailun Deng a b, Rui Shu a b, Hongliang Sun a b, Jing Li a b, Zixuan Wu c, Liu Yang d, Xiaosong Jiang a b]

Role of Nano-TiC Particles in Enhancing the Microstructure and Wear Resistance of IN718 Superalloys Fabricated by Directed Energy Deposition

Pub Date: 2025-07-31 DOI: https://doi.org/10.1016/j.triboint.2025.111050